How aarushchaudhary/raspberry-pi-adafruit-motor-shield-interface works
Project type and purpose
• This is an embedded-control project written in Python that runs on a Raspberry Pi.
• Purpose: generate PWM signals on two GPIO pins (GPIO 12, GPIO 13) to control servo motors via an Adafruit Motor Shield (L293D), with power and ground connections.
File structure
• Top level:
• Servo Control.py (Python script using RPi.GPIO or pigpio to output PWM)
• No frontend/backend split—this is single-process, hardware-control software.
Extract architecture details from the README
• Hardware components:
• Raspberry Pi (runs Python/Thonny)
• Adafruit Motor Shield (AFM) with L293D driver and servo headers D9 & D10
• Two servo motors
• 5 V power supply (either from Pi 5 V rail or external battery)
• Common ground
• Software components:
• Python script “Servo Control.py”
• RPi.GPIO (or pigpio) library for PWM generation
• Inside it, place “Servo Control.py” → “RPi.GPIO PWM” → “GPIO 12, GPIO 13”
• D9 → Servo 1 signal, D10 → Servo 2 signal
• +5 V power input and ground from the power-supply block
4. A “Power Supply” block at bottom or side
• Black line to common ground on Pi and AFM