# aarushchaudhary/raspberry-pi-adafruit-motor-shield-interface architecture

> Architecture diagram of the GitHub repository aarushchaudhary/raspberry-pi-adafruit-motor-shield-interface, generated by GitDiagram from its file tree, README and a sample of source files (last updated 2025-07-23). It is an AI-made overview: check details against the source.

- Interactive diagram: https://gitdiagram.com/aarushchaudhary/raspberry-pi-adafruit-motor-shield-interface
- Repository: https://github.com/aarushchaudhary/raspberry-pi-adafruit-motor-shield-interface

## Overview

##### Project type and purpose
- This is an embedded-control project written in Python that runs on a Raspberry Pi.
- Purpose: generate PWM signals on two GPIO pins (GPIO 12, GPIO 13) to control servo motors via an Adafruit Motor Shield (L293D), with power and ground connections.

##### File structure
- Top level:
- Servo Control.py (Python script using RPi.GPIO or pigpio to output PWM)
- No frontend/backend split—this is single-process, hardware-control software.

##### Extract architecture details from the README
- Hardware components:
- Raspberry Pi  (runs Python/Thonny)
- Adafruit Motor Shield (AFM) with L293D driver and servo headers D9 & D10
- Two servo motors
- 5 V power supply (either from Pi 5 V rail or external battery)
- Common ground
- Software components:
- Python script “Servo Control.py”
- RPi.GPIO (or pigpio) library for PWM generation

- Inside it, place “Servo Control.py” → “RPi.GPIO PWM” → “GPIO 12, GPIO 13”
- D9 → Servo 1 signal, D10 → Servo 2 signal
- +5 V power input and ground from the power-supply block
4. A “Power Supply” block at bottom or side
- Black line to common ground on Pi and AFM

## Diagram (Mermaid)

```mermaid
flowchart TB
    %% Subgraph for Raspberry Pi
    subgraph "Raspberry Pi"
        direction TB
        ServoControl["Servo Control.py"]:::script
        PWMDriver["RPi.GPIO / pigpio PWM"]:::lib
        GPIO12["GPIO 12"]:::hw
        GPIO13["GPIO 13"]:::hw
        Pi_GND["Ground"]:::ground
    end

    %% Adafruit Motor Shield
    subgraph "Adafruit Motor Shield (L293D)"
        direction TB
        AFM_5V["+5 V Input"]:::power
        AFM_GND["Ground"]:::ground
        AFM_D9["Header D9"]:::hw
        AFM_D10["Header D10"]:::hw
    end

    %% Servos
    subgraph "Servo Motors"
        direction TB
        Servo1["Servo Motor 1"]:::servo
        Servo2["Servo Motor 2"]:::servo
    end

    %% Power Supply
    PowerSupply["Power Supply"]:::power

    %% Connections
    ServoControl -->|"invokes PWM API"| PWMDriver
    PWMDriver -->|"PWM Signal"| GPIO12
    PWMDriver -->|"PWM Signal"| GPIO13
    GPIO12 -->|"Signal"| AFM_D9
    GPIO13 -->|"Signal"| AFM_D10
    PowerSupply -->|" +5 V"| AFM_5V
    PowerSupply -->|"Ground"| Pi_GND
    Pi_GND -->|"Common Ground"| AFM_GND
    AFM_D9 -->|"Signal"| Servo1
    AFM_D10 -->|"Signal"| Servo2

    %% Click Events
    click ServoControl "https://github.com/aarushchaudhary/raspberry-pi-adafruit-motor-shield-interface/blob/main/Servo Control.py"
    click README "https://github.com/aarushchaudhary/raspberry-pi-adafruit-motor-shield-interface/blob/main/README.md"

    %% Styles for Nodes
    classDef script fill:lightcyan,stroke:#333,stroke-width:1px
    classDef lib fill:lightgreen,stroke:#333,stroke-width:1px
    classDef hw fill:lightyellow,stroke:#333,stroke-width:1px
    classDef power fill:lightpink,stroke:#333,stroke-width:1px
    classDef ground fill:#cccccc,stroke:#333,stroke-width:1px
    classDef servo fill:beige,stroke:#333,stroke-width:1px
    classDef doc fill:lightgrey,stroke:#333,stroke-width:1px

    %% Link Styles
    linkStyle 1,2,3,4,8,9 stroke:#0000ff,stroke-width:2px
    linkStyle 5 stroke:red,stroke-width:2px
    linkStyle 6,7 stroke:black,stroke-width:2px
```
