How vbaczynski/rpi-usb-ip-display-headless works
The product is a headless Raspberry Pi status display: a Pi periodically gathers its hostname and interface addresses, sends them over USB CDC serial, and an RP2350 firmware displays them on an LCD. The README documents the Pi-side service, udev detection, and refresh timer; the setup script and firmware entry point are present in the tree but were not excerpted, so their internal wiring is not asserted. The sampled firmware shows paint, LCD-driver, hardware-abstraction, and font layers.
Main entry points: setup-ip-display.sh Pi setup · GUI_Paint.cpp Paint operations · LCD_1in47.cpp LCD driver · raspberry-pi Refresh timer
Components 13
Pi data service
- Pi setup
raspberry-pi/setup-ip-display.sh - USB detection
raspberry-pi - Refresh timer
raspberry-pi - Host and IP sender
raspberry-pi/setup-ip-display.sh
Display firmware
- Firmware application
firmware/HeadlessIpDisplay/HeadlessIpDisplay.ino
Graphics and hardware
- Paint operations
firmware/HeadlessIpDisplay/GUI_Paint.cpp - LCD driver
firmware/HeadlessIpDisplay/LCD_1in47.cpp - Board hardware I/O
firmware/HeadlessIpDisplay/DEV_Config.cpp - Font bitmaps
firmware/HeadlessIpDisplay
Other components
- Pi operator
- Raspberry Pi
- USB CDC serial
- LCD display
Connections 12
- Pi operator → Pi setup: installs
README.md - Pi setup → USB detection: configures
README.md - Pi setup → Refresh timer: installs
README.md - Raspberry Pi → Host and IP sender: provides host data
README.md - Refresh timer → Host and IP sender: triggers refresh
README.md - Host and IP sender → USB CDC serial: sends serial data
README.md - USB CDC serial → Firmware application: delivers serial data
README.md - Firmware application → Paint operations: renders status
- Paint operations → Font bitmaps: uses glyphs
firmware/HeadlessIpDisplay/GUI_Paint.h - Paint operations → LCD driver: draws via
- LCD driver → Board hardware I/O: uses hardware I/O
firmware/HeadlessIpDisplay/LCD_1in47.cpp - LCD driver → LCD display: updates LCD