# spb228/stm32_weather_station architecture

> Architecture diagram of the GitHub repository spb228/stm32_weather_station, generated by GitDiagram from its file tree, README and a sample of source files (last updated 2025-03-28). It is an AI-made overview: check details against the source.

- Interactive diagram: https://gitdiagram.com/spb228/stm32_weather_station
- Repository: https://github.com/spb228/stm32_weather_station

## Overview

##### Main Components
- Hardware Layer:
- STM32F401 Microcontroller (as inferred from the STM32F401.svd and the linker script file).
- Peripherals (sensors for weather data, although sensor drivers are not explicitly listed, the project blueprint “stm32-weather-station-blueprint.md” may detail them).
- Firmware Core:
- Startup Code and Linker Script: Illustrate how the MCU initializes (startup.c and linkerscript.ld).
- Main application logic (main.c) which orchestrates the operation.
- Common Modules (under src/common):
- System Clock Module (src/common/clock): Responsible for clock initialization and timing crucial for sensor reading intervals.
- LED Module (src/common/led): Likely used for status indication (diagnostics or error notifications).
- SysTick Module (src/common/systick): Provides real-time operating system ticks or basic timekeeping functions.
- UART Module (src/common/uart): Used for serial communication (debugging, output data, or configuration commands).

##### Relationships and Interactions
- The startup code initializes the hardware and system configuration using the clock module.
- The main application (main.c) then orchestrates the sequence where the SysTick timer might control periodic updates, and the LED or UART modules provide basic I/O operations.
- Data flows from the sensor interface (as might be defined in the blueprint) being processed then sent via UART, or visual feedback is provided via LED indicators.
- The clock and systick modules interact closely to maintain precise timing.

##### Architectural Patterns and Design Principles
- Modular Design: Separating common functionalities (clock, led, systick, and uart) into their dedicated folders promotes reusability and clarity. This pattern is typical in embedded design.
- Layered Architecture: Illustrate the separation between hardware initialization (startup, linker script), core firmware logic (main.c), and peripheral abstraction modules.
- Separation of Concerns: Each hardware controller (e.g., LED, UART) is abstracted in its own directory making maintenance and testing easier.

##### Technology Stack and Key Artifacts
- MCU: STM32F401 as the hardware platform.
- Tooling: Use of Makefile for building; configuration using a linker script and other support files.
- C-based firmware code organized in a structured folder hierarchy.
- External documentation: “stm32-weather-station-blueprint.md” may contain additional hints on sensor integration and high-level system behavior.

##### Specific Elements
- The initialization flow (startup -> system clock -> main loop).
- Data flow from sensor data (or simulated sensor inputs) to application logic.
- Communication towards a debugging terminal or serial output through UART.
- Dependencies (for example: “requires clock timing” or “relies on systick for interval timing”).

##### Additional Notes
- Even though the README is minimal, use the naming conventions and folder structure to deduce the design.
- Being detailed is key: even if some components may seem trivial (such as LED control), include them to ensure a full architectural picture.

## Diagram (Mermaid)

```mermaid
flowchart TD
    %% Hardware Layer
    subgraph "Hardware Layer"
        MCU["STM32F401 Microcontroller"]:::hardware
        Sensor["Sensor/Weather Station Blueprint"]:::hardware
    end

    %% Firmware Startup & Initialization
    subgraph "Firmware Startup & Initialization"
        Startup["Startup Code"]:::init
        Linker["Linker Script"]:::init
    end

    %% Application Logic
    subgraph "Application Logic"
        MainApp["Main Application Logic"]:::app
    end

    %% Modular Drivers
    subgraph "Modular Drivers"
        Clock["System Clock Module"]:::module
        LED["LED Control Module"]:::module
        SysTick["SysTick Module"]:::module
        UART["UART Communication Module"]:::module
    end

    %% Relationships and Interactions
    Startup -->|"initializes"| MCU
    Startup -->|"sets up"| Clock
    Linker -->|"configures"| Startup
    Clock -->|"enables"| MainApp
    MainApp -->|"controls"| LED
    MainApp -->|"monitors_via"| SysTick
    MainApp -->|"communicates_via"| UART
    Sensor -->|"provides_data"| MainApp
    Clock -->|"syncs_with"| SysTick

    %% Click Events
    click MCU "https://github.com/spb228/stm32_weather_station/blob/main/STM32F401.svd"
    click Sensor "https://github.com/spb228/stm32_weather_station/blob/main/stm32-weather-station-blueprint.md"
    click Startup "https://github.com/spb228/stm32_weather_station/blob/main/src/startup.c"
    click Linker "https://github.com/spb228/stm32_weather_station/blob/main/linkerscript.ld"
    click MainApp "https://github.com/spb228/stm32_weather_station/blob/main/src/main.c"
    click Clock "https://github.com/spb228/stm32_weather_station/blob/main/src/common/clock/system_clock.c"
    click LED "https://github.com/spb228/stm32_weather_station/blob/main/src/common/led/led.c"
    click SysTick "https://github.com/spb228/stm32_weather_station/blob/main/src/common/systick/systick.c"
    click UART "https://github.com/spb228/stm32_weather_station/blob/main/src/common/uart/uart.c"

    %% Styles
    classDef hardware fill:#AED6F1,stroke:#1B4F72,stroke-width:2px;
    classDef init fill:#FDEDEC,stroke:#922B21,stroke-width:2px;
    classDef app fill:#FCF3CF,stroke:#B7950B,stroke-width:2px;
    classDef module fill:#D5F5E3,stroke:#1E8449,stroke-width:2px;
```
