# solidcoffee/pulse_tube_cryocooler architecture

> Architecture diagram of the GitHub repository solidcoffee/pulse_tube_cryocooler, generated by GitDiagram from its file tree, README and a sample of source files (last updated 2025-01-11). It is an AI-made overview: check details against the source.

- Interactive diagram: https://gitdiagram.com/solidcoffee/pulse_tube_cryocooler
- Repository: https://github.com/solidcoffee/pulse_tube_cryocooler

## Overview

Key Components to Include in the System Design:

##### Data Input Layer
- Excel Data Sources (.xls, .xlsx files)
- RTD values (temperature sensors)
- NTC (Negative Temperature Coefficient) reference data
- Raw Data Files
- helium.txt (likely containing gas properties)

##### Processing Components
- MATLAB Analysis Module
- Pulse_tube_model.m (main simulation/modeling)
- RTD_vals.m (temperature processing)

- Hardware Interface Layer
- NTC_driver.h (temperature sensor driver)
- NTC_test.ino (Arduino-based testing interface)

##### Analysis Tools
- Porosity Calculator
- Schmidt's Analysis

##### Use a top-down approach with the following layers
- Data Input (top)
- Processing (middle)
- Analysis/Output (bottom)

##### Component Relationships
- Bidirectional communication between hardware interface components
- Data flow to analysis tools

##### Technical Details
- Specify file formats (.m, .h, .ino, .xls, .txt)
- Development platforms (MATLAB, Arduino)
- Sensor interfaces (RTD, NTC)

**[Data Sources]**

- v
**[Hardware Interface] <--> [Processing Layer]**

- v                        v
**[Sensor Integration] --> [Analysis Tools]**

Additional Recommendations:

##### Use standardized symbols
- Rectangles for processing modules
- Hexagons for hardware interfaces
- Diamonds for decision points or analysis tools

## Diagram (Mermaid)

```mermaid
graph TB
    %% Style Definitions
    classDef input fill:#b3d9ff,stroke:#333
    classDef processing fill:#90EE90,stroke:#333
    classDef hardware fill:#FFE5CC,stroke:#333
    classDef analysis fill:#FFB366,stroke:#333
    
    %% Data Input Layer
    subgraph DataInput["Data Input Layer"]
        ExcelData["Excel Data Sources"]:::input
        RTDData["RTD Temperature Data"]:::input
        NTCRef["NTC Reference Data"]:::input
        RawData["Raw Data Files"]:::input
        GasProps["Helium Properties"]:::input
    end

    %% Processing Layer
    subgraph Processing["Processing Layer"]
        MATLABModule["MATLAB Analysis Module"]:::processing
        PulseTube["Pulse Tube Model"]:::processing
        RTDVals["RTD Values Processing"]:::processing
    end

    %% Hardware Interface Layer
    subgraph Hardware["Hardware Interface Layer"]
        NTCDriver["NTC Driver"]:::hardware
        ArduinoTest["Arduino Test Interface"]:::hardware
    end

    %% Analysis Tools Layer
    subgraph Analysis["Analysis Tools"]
        Porosity["Porosity Calculator"]:::analysis
        Schmidt["Schmidt's Analysis"]:::analysis
    end

    %% Relationships
    ExcelData --> RTDData
    ExcelData --> NTCRef
    RawData --> GasProps
    
    RTDData --> RTDVals
    NTCRef --> NTCDriver
    GasProps --> PulseTube
    
    MATLABModule --> PulseTube
    MATLABModule --> RTDVals
    
    NTCDriver <--> ArduinoTest
    
    PulseTube --> Porosity
    PulseTube --> Schmidt
    RTDVals --> Schmidt

    %% Click Events
    click RTDData "https://github.com/SolidCoffee/Pulse_Tube_Cryocooler/blob/main/RTD vals.xlsx"
    click NTCRef "https://github.com/SolidCoffee/Pulse_Tube_Cryocooler/blob/main/NTC_Reference_For_Nick_Dont_Trust_This_Too_Much.xlsx"
    click GasProps "https://github.com/SolidCoffee/Pulse_Tube_Cryocooler/blob/main/helium.txt"
    click PulseTube "https://github.com/SolidCoffee/Pulse_Tube_Cryocooler/blob/main/Pulse_tube_model.m"
    click RTDVals "https://github.com/SolidCoffee/Pulse_Tube_Cryocooler/blob/main/RTD_vals.m"
    click NTCDriver "https://github.com/SolidCoffee/Pulse_Tube_Cryocooler/blob/main/NTC_driver.h"
    click ArduinoTest "https://github.com/SolidCoffee/Pulse_Tube_Cryocooler/blob/main/NTC_test.ino"
    click Porosity "https://github.com/SolidCoffee/Pulse_Tube_Cryocooler/tree/main/Porosity_Calculator"
    click Schmidt "https://github.com/SolidCoffee/Pulse_Tube_Cryocooler/tree/main/Schmidts_Analysis"

    %% Legend
    subgraph Legend
        L1["Data Input"]:::input
        L2["Processing"]:::processing
        L3["Hardware Interface"]:::hardware
        L4["Analysis Tools"]:::analysis
    end
```
