How robtillaart/i2c_24lc1025 works
Project type and purpose
• This is an Arduino library (“I2C_24LC1025”) that provides a clean C++ API to read/write a 1 Mbit I2C EEPROM (24LC1025 and equivalents).
• It is an open-source tool for embedded developers—no front-end or server back-end, but a hardware abstraction layer plus examples, tests, and CI.
File structure
• Top-level source:
• I2C_24LC1025.h / I2C_24LC1025.cpp – the core API implementation.
• keywords.txt, library.json, library.properties – Arduino/PlatformIO packaging metadata.
• Examples: eight separate Arduino sketches under examples/… showing various use cases on AVR, ESP32, RP2040, etc.
• Tests: test/unit_test_001.cpp – a host-based unit test.
• CI configs: .github/workflows/*.yml, .arduino-ci.yml – automated builds, linting, JSON checks.
Extract extra insights from the README
• Confirms API matches a predecessor (I2C_EEPROM) with 32-bit addressing.
• Describes hardware wiring (SDA, SCL, WP, A0–A2, GND, VCC) and critical constraints (A2 tied to VCC, optional WP control).
• Demonstrates extension points: injecting custom TwoWire instance, enabling/disabling write-protect, adjusting write cycle delays.
Main components
a. Software components
1. Arduino Sketch (example application)
2. I2C_24LC1025 Library (public API, internal logic)
3. TwoWire / Wire (Arduino core I2C driver)
4. Unit‐test harness (host-side test runner)
5. CI/CD pipelines (GitHub Actions workflows)
b. Hardware components
6. I2C Bus (SDA, SCL lines)
7. 24LC1025 EEPROM chip (pins: A0, A1, A2, WP, SDA, SCL)
8. MCU GPIO for WP (optional)
c. Relationships / Interactions
• Sketch calls library API → library invokes TwoWire methods → I2C frames on SDA/SCL → EEPROM chip responds.
• Library toggles WP GPIO to enter/exit write mode.
• Unit tests instantiate library in host simulation → verify logic without real hardware.
• CI workflows run examples compilation, lint, JSON validation, and unit tests on every push/PR.
Architectural patterns & principles
• Hardware abstraction: the library wraps TwoWire; supports dependency injection of the Wire object.
• Separation of concerns:
• API layer (I2C_24LC1025.h)
• Implementation layer (I2C_24LC1025.cpp)
• Packaging layer (library.json/properties, keywords.txt)
• Build/test layer (examples, unit tests, CI config)
• Extensibility:
• Example sketches demonstrate portability to multiple MCUs (AVR, ESP32, RP2040).
Final checklist to capture all essential elements
• Clearly labeled components in distinct lanes.
• Notes on configuration points (device address, WP pin, delays).
• CI pipelines as side processes.
• Technology callouts: C++, Arduino SDK, TwoWire, GoogleTest (if used), PlatformIO metadata.