# ramx13/smartjacket architecture

> Architecture diagram of the GitHub repository ramx13/smartjacket, generated by GitDiagram from its file tree, README and a sample of source files (last updated 2025-04-01). It is an AI-made overview: check details against the source.

- Interactive diagram: https://gitdiagram.com/ramx13/smartjacket
- Repository: https://github.com/ramx13/smartjacket

## Overview

##### Project Type and Purpose
- The project is an embedded systems application for a smart wearable (a smart jacket).
- It likely leverages different microcontrollers or modules: one (mega.ino) possibly running on an Arduino Mega or similar board to control sensors and actuators, and the other (iot.ino) possibly handling Internet connectivity (WiFi/Bluetooth) or acting as a network interface.

##### File Structure Insights
- README.md is the lone documentation file indicating the project name, “smartjacket”, setting the high-level intent.
- The two .ino files (iot.ino and mega.ino) separate the functionalities – hinting at an architectural separation where each sketch possibly runs on different hardware or handles different aspects of the system’s operation.

a. Main Components:
- Hardware Layers:
- Sensor/Actuator Module(s): Physical sensors (temperature, motion, etc.) and outputs (LEDs, vibration motors, etc.) that may be integrated into the jacket.
- Microcontrollers:
- Main Control Unit (“mega”): Likely implemented by the mega.ino code, responsible for reading sensor data, performing local processing, and controlling actuators.
- IoT/Communication Module: Likely implemented by the iot.ino code, responsible for network connectivity (WiFi/Bluetooth) and cloud or smartphone communication.
- Communication Interfaces:
- Wired or wireless links between the sensor modules and controllers.
- Data flow between the main control unit and the IoT module.
- External Entities (if applicable):
- Cloud Services/Mobile Applications: In case the jacket sends or receives data from external systems for further processing or user notifications.

b. Relationships and Interactions:
- Sensors send data to the main microcontroller.
- The main microcontroller processes this data and forwards relevant information to the IoT module.
- The IoT module then transmits data externally (to cloud services or a mobile app) and possibly receives commands back.
- Clearly denote the separation of concerns: one part handling local processing and real-time sensor interfacing, the other responsible for network operations.

c. Architectural Patterns/Design Principles:
- Modular Design: Separating sensor/control logic (mega.ino) from communication/network logic (iot.ino) encourages maintainability and scalability.
- Loose Coupling: The two microcontroller programs should interact via defined interfaces or communication protocols, possibly over a serial connection, ensuring that each module can evolve independently.
- Embedded System Considerations: Emphasize real-time data processing and the constraints of embedded hardware (limited resources, power management, etc.).

d. Incorporate Relevant Technologies and Frameworks:
- Arduino Platform: Use Arduino’s libraries and possibly external sensor or networking libraries.
- Hardware Components: Label any assumed boards (e.g., Arduino Mega, Arduino IoT board) and any sensor modules (even if not explicitly present in the file tree, it’s good to anticipate them in a smart wearable).

## Diagram (Mermaid)

```mermaid
flowchart TD
    subgraph "Hardware Interface Layer"
        Sensors["Sensors Module (Temperature, Motion)"]:::hardware
        Actuators["Actuators Module (LEDs, Motors)"]:::hardware
    end

    subgraph "Microcontroller/Firmware Layer"
        Mega["Main Control Unit (mega.ino)"]:::firmware
        IoT["IoT/Communication Module (iot.ino)"]:::firmware
    end

    subgraph "External Interfaces"
        Cloud["Cloud Services/Mobile App"]:::external
    end

    subgraph "Documentation"
        Doc["Project Documentation (README.md)"]:::documentation
    end

    Sensors -->|"reads"| Mega
    Mega -->|"processes & sends data"| IoT
    IoT -->|"transmits data"| Cloud
    Cloud -->|"sends commands"| IoT
    Mega -->|"controls"| Actuators

    %% Click Events
    click Mega "https://github.com/ramx13/smartjacket/blob/main/mega.ino"
    click IoT "https://github.com/ramx13/smartjacket/blob/main/iot.ino"
    click Doc "https://github.com/ramx13/smartjacket/blob/main/README.md"

    %% Styles
    classDef hardware fill:#f5f5dc,stroke:#b8860b,stroke-width:2px;
    classDef firmware fill:#add8e6,stroke:#00008b,stroke-width:2px;
    classDef external fill:#90ee90,stroke:#006400,stroke-width:2px;
    classDef documentation fill:#ffa07a,stroke:#cd5c5c,stroke-width:2px;
```
