# moggiex/nrf24l01-pa-lna-testing-scripts architecture

> Architecture diagram of the GitHub repository moggiex/nrf24l01-pa-lna-testing-scripts, generated by GitDiagram from its file tree, README and a sample of source files (last updated 2024-12-27). It is an AI-made overview: check details against the source.

- Interactive diagram: https://gitdiagram.com/moggiex/nrf24l01-pa-lna-testing-scripts
- Repository: https://github.com/moggiex/nrf24l01-pa-lna-testing-scripts

## Overview

##### Main Components

a. Hardware Layer:
- Two Arduino Pro Mini (3.3V) boards
- Two NRF24L01+PA+LNA transceivers
- External 3.3V power supply (LM1117T)
- Capacitors (10μF and 0.1μF)

b. Software Layer:
- Transmitter program
- Receiver program
- RF24 library integration

##### Specific Elements

a. Pin Connection Table:
**Arduino Pin | NRF24L01+ Pin**

**GND        | Pin 1 (GND)**
**3.3V       | Pin 2 (VCC)**
**9          | Pin 3 (CE)**
**10         | Pin 4 (CSN)**
**13         | Pin 5 (SCK)**
**11         | Pin 6 (MOSI)**
**12         | Pin 7 (MISO)**

b. Power Management Section:
- LM1117T voltage regulator configuration
- Capacitor placement
- Ground connections between power supply and Arduino

##### Labels

- Component names and model numbers
- Pin numbers and signal names
- Voltage levels (3.3V, GND)
- Data rates (250KBPS)
- Communication protocol details

##### Notes Section

- Power requirements
- Critical setup requirements
- Common troubleshooting points
- Testing procedure steps

- The importance of proper power supply
- The critical pin connections
- The bidirectional nature of the communication
- The testing workflow from basic connectivity to full communication

This will create a comprehensive system design that helps engineers understand both the hardware setup and software communication flow of the NRF24L01 testing system.

## Diagram (Mermaid)

```mermaid
graph TB
    subgraph Hardware
        direction TB
        
        subgraph TX["Transmitter Setup"]
            direction TB
            AT["Arduino Pro Mini (3.3V)"]
            NT["NRF24L01+PA+LNA"]
            PT["Power Supply (LM1117T)"]
            CT1["Capacitor 10μF"]
            CT2["Capacitor 0.1μF"]
            
            AT --- NT
            PT --- AT
            PT --- CT1
            PT --- CT2
        end
        
        subgraph RX["Receiver Setup"]
            direction TB
            AR["Arduino Pro Mini (3.3V)"]
            NR["NRF24L01+PA+LNA"]
            PR["Power Supply (LM1117T)"]
            CR1["Capacitor 10μF"]
            CR2["Capacitor 0.1μF"]
            
            AR --- NR
            PR --- AR
            PR --- CR1
            PR --- CR2
        end
        
        NT -.-|"Wireless Communication 250KBPS"| NR
    end
    
    subgraph Software
        direction TB
        
        subgraph "Communication Layer"
            RF24["RF24 Library"]
            TP["Transmitter Program"]
            RP["Receiver Program"]
            TS["Testing Script"]
            
            RF24 --- TP
            RF24 --- RP
            TS --- TP
            TS --- RP
        end
        
        subgraph "Pin Configuration"
            PC[("
            Arduino | NRF24L01+
            GND | Pin 1 (GND)
            3.3V | Pin 2 (VCC)
            9 | Pin 3 (CE)
            10 | Pin 4 (CSN)
            13 | Pin 5 (SCK)
            11 | Pin 6 (MOSI)
            12 | Pin 7 (MISO)
            ")]
        end
    end
    
    classDef hardware fill:#f9f,stroke:#333,stroke-width:2px
    classDef software fill:#bbf,stroke:#333,stroke-width:2px
    classDef config fill:#dfd,stroke:#333,stroke-width:2px
    
    class TX,RX hardware
    class TP,RP,TS,RF24 software
    class PC config
    
    click TP "https://github.com/moggiex/NRF24L01-PA-LNA-Testing-Scripts/blob/master/Transmitter.ino"
    click RP "https://github.com/moggiex/NRF24L01-PA-LNA-Testing-Scripts/blob/master/Receiver.ino"
    click TS "https://github.com/moggiex/NRF24L01-PA-LNA-Testing-Scripts/blob/master/Start_with_this_testing_script.ino"
```
