# miguelbalboa/rfid architecture

> Architecture diagram of the GitHub repository miguelbalboa/rfid, generated by GitDiagram from its file tree, README and a sample of source files (last updated 2025-03-31). It is an AI-made overview: check details against the source.

- Interactive diagram: https://gitdiagram.com/miguelbalboa/rfid
- Repository: https://github.com/miguelbalboa/rfid

## Overview

##### Project’s purpose and type
- This is an embedded software library intended to run on Arduino-compatible microcontrollers.
- Its main function is to facilitate RFID communication with MFRC522 (and similar) hardware modules via the SPI interface.
- It also provides multiple example sketches (located in the “examples” folder) that showcase how to read, write, clone, and modify RFID tags/cards.

##### Break down the main components
a. Hardware Components:
- Arduino/MCU: The microcontroller that runs user code and uses the library.
- MFRC522 RFID Reader Module: The RFID hardware (PCD) based on the NXP MFRC522 chip.
- RFID Tags/Cards (PICC): Passive cards that interface with the reader via a 13.56 MHz electromagnetic field.

b. Software Components:
- MFRC522 Library: The core of the project, located in the “src” directory (files such as MFRC522.cpp, MFRC522.h, and extended variants).
- SPI Communication Interface: The Arduino SPI API (via SPI.h) that the library uses to communicate with the RFID reader.
- Example Sketches: Numerous example applications provided in the “examples” folder (ChangeUID, DumpInfo, RFID-Cloner, etc.) that demonstrate various use cases of the library.

c. Supporting Documentation & Build Tools:
- CI/Build Configurations: GitHub workflows and configuration files (see “.github” and “library.properties”) that ensure the code is built and tested with the Arduino IDE and PlatformIO.

##### Relationships and interactions
- The Arduino board (with its firmware/Sketch) integrates the MFRC522 library.
- The library makes calls to the SPI interface that eventually trigger data transfers with the RFID reader.
- The MFRC522 reader module uses the SPI interface to send and receive RFID commands/data.
- The RFID tags respond to the electromagnetic signals generated by the reader.
- Example sketches act as entry points where the user code exercises the library’s functionality.

##### Architectural design principles
- Modularity: The project cleanly separates hardware-specific code (in “src”) from example code and documentation.
- Abstraction: The library abstracts the low-level SPI communication, offering a simple API for higher-level RFID operations.
- Reusability: The design is made to support different sketches and even variations of hardware by using configuration files and clearly separated source modules.

## Diagram (Mermaid)

```mermaid
flowchart TD
    subgraph "Hardware Layer"
        A["Arduino Microcontroller"]:::hardware
        R["MFRC522 RFID Reader Module"]:::hardware
        T["RFID Card/Tag (PICC)"]:::hardware
    end

    subgraph "Software Layer"
        L["MFRC522 Library Module"]:::software
        S["SPI Communication Interface"]:::software
        E["Example Sketches"]:::software
        L1["MFRC522.cpp"]:::software
        L2["MFRC522.h"]:::software
        L3["MFRC522Extended.cpp"]:::software
        L4["MFRC522Extended.h"]:::software
        E1["ChangeUID.ino"]:::software
        E2["DumpInfo.ino"]:::software

        L --> L1
        L --> L2
        L --> L3
        L --> L4

        E --> E1
        E --> E2
    end

    subgraph "Support Layer"
        D["Documentation & Supporting Materials"]:::support
        C["CI/Build Configurations"]:::support
    end

    A -->|"integrates"| L
    E -->|"demonstrates"| L
    L -->|"calls"| S
    S -->|"viaSPI"| R
    R -->|"interacts"| T
    L -->|"described_by"| D
    L -->|"built_with"| C

    classDef hardware fill:#ADD8E6,stroke:#000,stroke-width:2px;
    classDef software fill:#C8E6C9,stroke:#000,stroke-width:2px;
    classDef support fill:#FFECB3,stroke:#000,stroke-width:2px;

    click L1 "https://github.com/miguelbalboa/rfid/blob/master/src/MFRC522.cpp"
    click L2 "https://github.com/miguelbalboa/rfid/blob/master/src/MFRC522.h"
    click L3 "https://github.com/miguelbalboa/rfid/blob/master/src/MFRC522Extended.cpp"
    click L4 "https://github.com/miguelbalboa/rfid/blob/master/src/MFRC522Extended.h"
    click E "https://github.com/miguelbalboa/rfid/tree/master/examples/"
    click E1 "https://github.com/miguelbalboa/rfid/blob/master/examples/ChangeUID/ChangeUID.ino"
    click E2 "https://github.com/miguelbalboa/rfid/blob/master/examples/DumpInfo/DumpInfo.ino"
    click D "https://github.com/miguelbalboa/rfid/tree/master/doc/"
    click C "https://github.com/miguelbalboa/rfid/tree/master/.github/"
```
