How kentlouisetonino/hw-blinking-led works
Project type and purpose
• This is an embedded firmware project for a “blinking LED” demo on an ATmega328P microcontroller.
• It uses C (avr-gcc) and AVR libc instead of the Arduino IDE.
File structure
• Top-level:
• Makefile – orchestrates build and upload
• README.md – overview, setup and system design
• src/ – firmware source (main.c) and compiled artifacts (main.o, main.hex, etc.)
• No frontend/backend split—this is a single embedded binary project.
• Key build tools invoked: gcc-avr, binutils-avr, avr-libc, avrdude.
README for additional insights
• System Design section includes two images:
• “Makefile Process” – build and upload pipeline
• “Breadboarding” – hardware layout (ATmega328P, LED, resistor, breadboard)
• Local development: toolchain install instructions and usage of make build.
a. Main components
• Development Host (Linux PC)
• Toolchain & Build System (Makefile, gcc-avr, avr-libc, binutils-avr)
• Programming Utility (avrdude)
• Target Hardware (Arduino UNO R3 / ATmega328P on breadboard)
• Physical LED circuit (LED + resistor wired to microcontroller I/O pin)
b. Relationships & interactions
• Host invokes Makefile
• Makefile calls gcc-avr → compiles main.c to main.o
• binutils-avr (ld, objcopy) → links object, produces main.hex
• avrdude uploads main.hex to ATmega328P via USB
• ATmega328P executes firmware, toggles I/O pin driving LED
c. Architectural patterns / design principles
• Cross-compilation pipeline
• Clear separation between build stages (compile/link/flash)
• Minimal runtime (no OS, bare-metal loop)
d. Key technologies / frameworks
• avr-gcc (C compiler)
• avr-libc (C standard library for AVR)
• binutils-avr (assembler/linker)
• avrdude (flash programmer)
• Makefile (build orchestration)