# jh989876525/usb_test_mode architecture

> Architecture diagram of the GitHub repository jh989876525/usb_test_mode, generated by GitDiagram from its file tree, README and a sample of source files (last updated 2025-05-21). It is an AI-made overview: check details against the source.

- Interactive diagram: https://gitdiagram.com/jh989876525/usb_test_mode
- Repository: https://github.com/jh989876525/usb_test_mode

## Overview

##### Project type and purpose
- From the README and file tree, this is a small open-source Linux command-line tool (USB_TEST_MODE) written in C.
- Its purpose is to perform USB2.0/USB3.0 compliance tests by driving a selected USB device into test modes via libusb.

##### File structure
- Top‐level files only:
- USB_TEST_MODE.c – the single source file containing the CLI logic and libusb calls
- Makefile – build script
- README.md, .gitignore, LICENSE – documentation and repo meta
- No frontend/backend split, no services—just a standalone binary with one external dependency (libusb).

##### README for additional insights
- Describes build steps (make), runtime steps (lsusb, sudo ./USB_TEST_MODE), user interactions (select device, mode, port).
- External dependency: libusb and the Linux USB kernel stack.

##### Main components
a. User CLI Layer
– “User” or “Operator” issuing shell commands (lsusb, sudo ./USB_TEST_MODE)
– USB_TEST_MODE binary (CLI parser + test-mode logic)
b. Library Layer
– libusb – user-space USB library that communicates with the kernel
c. OS / Kernel Layer
– Linux USB kernel subsystem and host controller drivers
d. Hardware Layer
– USB host controller and physical USB bus
– Device Under Test (DUT) – the actual USB2.0/3.0 device
– Compliance test equipment (oscilloscope or waveform analyzer) connected to the DUT’s lines
– Makefile, README, LICENSE, .gitignore as supporting artifacts

##### Relationships and interactions
- User → CLI: user invokes commands
- CLI → libusb: binary makes API calls to configure test modes
- libusb ↔ kernel: libusb issues USB control transfers via /dev/bus/usb
- Kernel → host controller hardware: dispatches USB packets on the bus
- Host controller ↔ DUT: electrical signaling and test-mode activation
- DUT ↔ Test Equipment: waveform capture for verification
- Lsusb is a helper step—can be shown as an adjacent tool querying the kernel for topology.

##### Architectural patterns and design principles
- Single-process, sequential command-line tool
- Clear separation of concerns: CLI parsing vs USB communication vs hardware control
- Use of a well-known user-space library (libusb) as an abstraction over the kernel’s USB stack
- Minimal external dependencies for ease of build and portability

##### Relevant technologies/frameworks
- C language
- Makefile-driven build
- libusb (user-space USB library)
- Linux USB kernel subsystem
- Standard UNIX shell tools (lsusb)

## Diagram (Mermaid)

```mermaid
flowchart TB
    subgraph "User & Tooling"
        User["Operator/User"]:::user
        LSUSB["lsusb Tool"]:::user
    end

    subgraph "Project Build"
        Makefile["Makefile"]:::proj
        README["README.md"]:::proj
        GITIGNORE[".gitignore"]:::proj
        LICENSE["LICENSE"]:::proj
    end

    subgraph "User-space Components"
        Binary["USB_TEST_MODE (CLI Binary)"]:::app
        LIBUSB["libusb"]:::app
    end

    subgraph "Kernel Space"
        Kernel["Linux USB Kernel Stack"]:::kernel
    end

    subgraph "Hardware Layer"
        HostCtrl["USB Host Controller"]:::hw
        DUT["Device Under Test (DUT)"]:::hw
        TestEquip["Test Equipment\n(Oscilloscope)"]:::hw
    end

    Makefile -->|"build"| Binary
    User -->|"invokes"| Binary
    User -->|"queries"| LSUSB
    LSUSB -->|"USB topology"| Kernel
    Binary -->|"API calls"| LIBUSB
    LIBUSB -->|"USB control transfers"| Kernel
    Kernel -->|"dispatch USB packets"| HostCtrl
    HostCtrl -->|"signals/test modes"| DUT
    DUT -->|"waveform data"| TestEquip

    click Binary "https://github.com/jh989876525/usb_test_mode/blob/main/USB_TEST_MODE.c"
    click Makefile "https://github.com/jh989876525/usb_test_mode/tree/main/Makefile"
    click README "https://github.com/jh989876525/usb_test_mode/blob/main/README.md"
    click GITIGNORE "https://github.com/jh989876525/usb_test_mode/blob/main/.gitignore"
    click LICENSE "https://github.com/jh989876525/usb_test_mode/tree/main/LICENSE"

    classDef user fill:#a2fca2,stroke:#333,stroke-width:1px
    classDef app fill:#98fb98,stroke:#333,stroke-width:1px
    classDef kernel fill:#add8e6,stroke:#333,stroke-width:1px
    classDef hw fill:#ffcc99,stroke:#333,stroke-width:1px
    classDef proj fill:#f2f2f2,stroke:#333,stroke-width:1px
```
