How emenstanougat/esp32-bluejammer works
This repository is a hardware-and-firmware distribution for the ESP32-BlueJammer, not a source-code project: it provides prebuilt firmware images, bootloader/partition binaries, enclosure models, and build guidance. The documented user workflow is to choose a firmware mode, flash the device, then observe or switch modes using the OLED, LED, and Boot button where supported. Firmware variants cover Bluetooth, BLE, Wi-Fi, RC, and combinations; the README also describes PCB and enclosure options. No source excerpts were supplied, so internal firmware behavior and most binary-to-hardware relationships remain undocumented here.
Main entry points: README.md ESP32 device · Generic Mode selection · Bootloader&Partitions Boot and partitions · OLED OLED images
Components 15
Firmware images
- Mode selection
Firmware_Files/Generic - Generic images
Firmware_Files/Generic - OLED images
Firmware_Files/OLED - Official combo image
Firmware_Files/Official/Official-Combo-Channel_BT-BLE-WiFi-RC.ino.bin - Flipper Zero image
Firmware_Files/FlipperZero_Firmware-ZeroWave/FlipperZeroFirmware.ino.bin - Boot and partitions
Firmware_Files/Bootloader&Partitions
Device hardware
- Firmware flashing
README.md - ESP32 device
README.md - RF modules
README.md - OLED and indicators
README.md - PCB designs
README.md
Enclosure models
- RF PCB cases
3D files/ESP32-RF_DIY-PCB_enclosure - Ebyte PCB case
3D files/ESP32-RF_Ebyte_DIY-PCB_enclosure - Perfboard cases
3D files/PerfboardBuild
Other components
- Device builder
Connections 14
- Device builder → Mode selection: chooses mode
README.md - Mode selection → Generic images: selects image
README.md - Mode selection → OLED images: selects image
README.md - Device builder → Firmware flashing: flashes firmware
README.md - Firmware flashing → ESP32 device: loads image
- Device builder → Official combo image: may choose
- Device builder → Flipper Zero image: may choose
- Boot and partitions → ESP32 device: supports boot
- ESP32 device → RF modules: uses radio modules
README.md - ESP32 device → OLED and indicators: drives display
README.md - Device builder → PCB designs: assembles hardware
README.md - PCB designs → RF PCB cases: fits enclosure
README.md - PCB designs → Ebyte PCB case: fits enclosure
- Device builder → Perfboard cases: may use