# bremenpl/altium-projects architecture

> Architecture diagram of the GitHub repository bremenpl/altium-projects, generated by GitDiagram from its file tree, README and a sample of source files (last updated 2024-12-28). It is an AI-made overview: check details against the source.

- Interactive diagram: https://gitdiagram.com/bremenpl/altium-projects
- Repository: https://github.com/bremenpl/altium-projects

## Overview

a) GSM_GPS_MODULE (Complex multi-sheet design):
- MCU component (from MCU.SchDoc)
- NEO6 GPS module (from NEO6.SchDoc)
- SIM900 GSM module (from SIM900.SchDoc)
- Signal flow between components
- Power distribution

b) GruntMasterBox (Most complex design):
- DDS (Direct Digital Synthesis) section
- Reference Voltages
- Analog circuitry
- MCU section
- Power management
- USB-to-UART interface
- Interconnections using harness definitions

c) STM32_Analog_Cape:
- BeagleBone interface
- Analog sections (both Analog.SchDoc and Analog2.SchDoc)
- MCU section
- Power management
- Signal routing and interfaces

##### Technical Details

For each component, show:
- Interface types (UART, SPI, I2C, etc.)
- Power requirements
- Signal types (analog/digital)
- Critical components and their relationships

##### Hierarchical Organization

Create three levels of detail:

## Diagram (Mermaid)

```mermaid
graph TB
    subgraph Legend
        L1[Main PCB Component]:::pcb
        L2[/Interface/]:::interface
        L3[(Processor/MCU)]:::mcu
        L4[[Peripheral]]:::peripheral
        L5{{Power Component}}:::power
        L6[Analog Circuit]:::analog
        L7>Communication Module]:::comm
    end

    subgraph GSM_GPS
        MCU_GSM[(MCU)]:::mcu
        click MCU_GSM "https://github.com/bremenpl/altium-projects/blob/master/GSM_GPS_MODULE/MCU.SchDoc"
        NEO6[[NEO6 GPS]]:::peripheral
        click NEO6 "https://github.com/bremenpl/altium-projects/blob/master/GSM_GPS_MODULE/NEO6.SchDoc"
        SIM900>SIM900 GSM]:::comm
        click SIM900 "https://github.com/bremenpl/altium-projects/blob/master/GSM_GPS_MODULE/SIM900.SchDoc"
        MCU_GSM --> NEO6
        MCU_GSM --> SIM900
    end

    subgraph GruntMasterBox
        DDS[DDS Circuit]:::analog
        click DDS "https://github.com/bremenpl/altium-projects/blob/master/GruntMasterBox/DDS.SchDoc"
        RefVolt[Reference Voltages]:::analog
        click RefVolt "https://github.com/bremenpl/altium-projects/blob/master/GruntMasterBox/RefVoltages.SchDoc"
        AnalogCircuit[Analog Circuit]:::analog
        click AnalogCircuit "https://github.com/bremenpl/altium-projects/blob/master/GruntMasterBox/analog.SchDoc"
        MCU_GRUNT[(MCU)]:::mcu
        click MCU_GRUNT "https://github.com/bremenpl/altium-projects/blob/master/GruntMasterBox/mcu.SchDoc"
        PowerMgmt{{Power Management}}:::power
        click PowerMgmt "https://github.com/bremenpl/altium-projects/blob/master/GruntMasterBox/power.SchDoc"
        USB2UART[/USB-UART Bridge/]:::interface
        click USB2UART "https://github.com/bremenpl/altium-projects/blob/master/GruntMasterBox/usb2uart.SchDoc"
        
        MCU_GRUNT --> DDS
        MCU_GRUNT --> RefVolt
        MCU_GRUNT --> AnalogCircuit
        PowerMgmt -.-> MCU_GRUNT
        MCU_GRUNT --> USB2UART
    end

    subgraph STM32_Cape
        BeagleInterface[/BeagleBone Interface/]:::interface
        click BeagleInterface "https://github.com/bremenpl/altium-projects/blob/master/STM32_Analog_Cape/Beagle.SchDoc"
        Analog1[Analog Section 1]:::analog
        click Analog1 "https://github.com/bremenpl/altium-projects/blob/master/STM32_Analog_Cape/Analog.SchDoc"
        Analog2[Analog Section 2]:::analog
        click Analog2 "https://github.com/bremenpl/altium-projects/blob/master/STM32_Analog_Cape/Analog2.SchDoc"
        MCU_STM[(MCU)]:::mcu
        click MCU_STM "https://github.com/bremenpl/altium-projects/blob/master/STM32_Analog_Cape/Mcu.SchDoc"
        PowerSTM{{Power Management}}:::power
        click PowerSTM "https://github.com/bremenpl/altium-projects/blob/master/STM32_Analog_Cape/Power.SchDoc"
        
        MCU_STM --> BeagleInterface
        MCU_STM --> Analog1
        MCU_STM --> Analog2
        PowerSTM -.-> MCU_STM
    end

    subgraph JTAG_Adapters
        JTAG1[JTAG Adapter v1]:::pcb
        click JTAG1 "https://github.com/bremenpl/altium-projects/blob/master/JTAG_Adapter/JTAG_Adapter.SchDoc"
        JTAG2[JTAG Adapter v2]:::pcb
        click JTAG2 "https://github.com/bremenpl/altium-projects/blob/master/JTAG_Adapter_2/JTAG_Adapter.SchDoc"
    end

    subgraph Other_PCBs
        PowerBoard{{Power Board}}:::power
        click PowerBoard "https://github.com/bremenpl/altium-projects/blob/master/PowerBoard/PowerBoard.SchDoc"
        SideBoard[Side Connectors]:::pcb
        click SideBoard "https://github.com/bremenpl/altium-projects/blob/master/SideConnectorsBoard/SideConnectorsBoard.SchDoc"
        USBBoard[/USB Board/]:::interface
        click USBBoard "https://github.com/bremenpl/altium-projects/blob/master/UsbBoard/UsbBoard.SchDoc"
        Timer[DE118 Timer]:::pcb
        click Timer "https://github.com/bremenpl/altium-projects/blob/master/DE118_Timer/schematic.SchDoc"
    end

    classDef pcb fill:#f9f,stroke:#333,stroke-width:2px
    classDef interface fill:#ff9,stroke:#333,stroke-width:2px
    classDef mcu fill:#9cf,stroke:#333,stroke-width:2px
    classDef peripheral fill:#cff,stroke:#333,stroke-width:2px
    classDef power fill:#f99,stroke:#333,stroke-width:2px
    classDef analog fill:#9f9,stroke:#333,stroke-width:2px
    classDef comm fill:#fc9,stroke:#333,stroke-width:2px
```
