# aromring/frequencyanddutymeter architecture

> Architecture diagram of the GitHub repository aromring/frequencyanddutymeter, generated by GitDiagram from its file tree, README and a sample of source files (last updated 2025-03-31). It is an AI-made overview: check details against the source.

- Interactive diagram: https://gitdiagram.com/aromring/frequencyanddutymeter
- Repository: https://github.com/aromring/frequencyanddutymeter

## Overview

##### Main components
- Hardware:
- The ItsyBitsy M0 Express board with its Atmel SAMD21 microcontroller.
- The input signal source – a 3.3 V square wave.
- (Optional) Any additional hardware such as indicators (LEDs), communication interfaces (for serial output) or other IO peripherals.
- Firmware:
- The FrequencyAndDuty.ino sketch containing the setup, main loop, and timing logic.
- Functions or modules within the sketch responsible for measuring pulse width and period (by counting the 48 MHz clock cycles).
- Data processing components that compute the frequency and duty cycle based on measured timing values.

##### Relationships and interactions
- The square wave signal is fed into a designated input of the microcontroller.
- The microcontroller’s timer/counter hardware (driven by the 48 MHz clock) is used in the firmware to measure the period and pulse width.
- The firmware then calculates the frequency and duty cycle from these measurements.
- The results may be output via serial communication (or other forms as indicated in the .ino file’s internal comments) to a debugging terminal, display, or logging interface.

##### Important architectural patterns and design principles
- Although the code is contained in a single .ino file due to the simplicity of most embedded firmware projects, there is a clear separation between hardware interfacing and signal processing functions.
- The design should emphasize real-time processing—capturing precise clock cycle counts to compute the metrics.

##### Relevant technologies
- Hardware: Atmel SAMD21 microcontroller, ItsyBitsy M0 Express board.
- Software: Arduino programming environment and libraries.
- Clock/timing mechanisms provided by the microcontroller’s hardware (48 MHz system clock).

## Diagram (Mermaid)

```mermaid
flowchart TD
    %% Hardware Components
    A["Square Wave Signal Source"]:::hardware
    B["ItsyBitsy M0 Express (Atmel SAMD21)"]:::hardware

    %% Firmware Components as a Subgraph
    subgraph "Firmware (FrequencyAndDuty.ino)"
        fwMain["Firmware Main Sketch"]:::firmware
        timer["Timer/Counter & Clock Integration"]:::firmware
        calc["Frequency & Duty Calculation Module"]:::firmware
        out["Output Interface"]:::firmware
    end

    %% Documentation Node
    doc["Documentation & Application Context"]:::doc

    %% Connections Between Components
    A -->|"feeds"| B
    B -->|"inputCapture"| timer
    timer -->|"providesCount"| calc
    calc -->|"outputsResults"| out
    fwMain ---|"implements"| timer
    fwMain ---|"implements"| calc
    fwMain -->|"describedIn"| doc

    %% Click Events
    click fwMain "https://github.com/aromring/frequencyanddutymeter/blob/master/FrequencyAndDuty.ino"
    click timer "https://github.com/aromring/frequencyanddutymeter/blob/master/FrequencyAndDuty.ino"
    click calc "https://github.com/aromring/frequencyanddutymeter/blob/master/FrequencyAndDuty.ino"
    click doc "https://github.com/aromring/frequencyanddutymeter/blob/master/README.md"

    %% Styles
    classDef hardware fill:#AED6F1,stroke:#1F618D,stroke-width:2px;
    classDef firmware fill:#ABEBC6,stroke:#239B56,stroke-width:2px;
    classDef doc fill:#F9E79F,stroke:#B7950B,stroke-width:2px;
```
