# aho1go/m5can architecture

> Architecture diagram of the GitHub repository aho1go/m5can, generated by GitDiagram from its file tree, README and a sample of source files (last updated 2025-03-30). It is an AI-made overview: check details against the source.

- Interactive diagram: https://gitdiagram.com/aho1go/m5can
- Repository: https://github.com/aho1go/m5can

## Overview

##### Project Overview
- This project (named “M5CAN”) is designed for CAN communication using an M5Stack device together with a COMMU module. The main functionality is implemented in the M5CAN.ino Arduino sketch and it leverages the MCP_CAN_lib library.
- The README also shows that there is integration with Linux SocketCAN utilities (e.g., using socat, slcand, ifconfig, cansend, and candump commands) which implies that the device or its signals can interact with a Linux system over a virtual CAN interface.

##### Analyzing the File Structure
- The top-level files include the .ino sketch (M5CAN.ino), the license file, and a configuration header (Free_Fonts.h) which likely supports the device’s user interface needs.
- A subdirectory “SD” exists containing text files for button configurations (button1.txt, button2.txt, button3.txt) and wifi.txt. This directory suggests that the system might read configuration or command parameters from an SD card.
- The presence of the .gitignore and LICENSE indicates openness to version control and sharing.

##### Main Components
a. Embedded Device Component:
- M5Stack Hardware: Represents the microcontroller target, where the M5CAN.ino sketch is flashed.
- Communication Module: The COMMU module integrated with the M5Stack for CAN communication.
- MCP_CAN_lib: The library used for CAN interface management is a critical part of the device’s software stack.
- SD Card Interface: Illustrate that the device interacts with an SD card (folder SD with button and wifi configuration files) to possibly load settings or mapping information.
- /User Interface: Given the inclusion of Free_Fonts.h, a display/UI system running on the M5Stack is likely used to provide visual feedback.

b. External Systems:

##### Relationships and Data Flow
- From the M5Stack to the CAN bus: Show the data flow controlled by the MCP_CAN_lib.
- From the SD card (or filesystem storage loaded via SD directory) to the main application: Indicate that configuration data and button mappings are read at startup or dynamically during operation.
- Between the M5Stack (via its CAN interface) and an external Linux-based system: Show the connection conforming to SocketCAN standards with a bidirectional flow (allowing sending and receiving of CAN messages).

##### Architectural Patterns and Design Principles
- The design follows a typical embedded system architecture where hardware (M5Stack, SD card, CAN transceiver module) interacts with application logic implemented in the single Arduino sketch.
- Modularity in communication (CAN protocol abstraction via MCP_CAN_lib) and configuration management (SD card file reading).
- The directions for using debugging flags (DEBUG_MODE) in the mcp_can_dfs.h file shows that there is conditional compilation for deployment versus debugging, so include a note on build/configuration management in the system design.

## Diagram (Mermaid)

```mermaid
flowchart TD
    subgraph "Embedded System"
        M5Stack["M5Stack (M5CAN.ino w MCP_CAN_lib)"]:::embedded
        SD["SD Card / Filesystem\n(button1.txt, button2.txt, button3.txt, wifi.txt)"]:::storage
        Display["Display/UI (Free_Fonts.h)"]:::ui
        BuildNote["Remember:DisableDEBUG_MODEfordeployment"]:::note
    end

    CANBus["CAN Bus"]:::bus
    Linux["Linux System (SocketCAN)"]:::external

    SD -->|"ConfigData"| M5Stack
    M5Stack -->|"CANBusData"| CANBus
    CANBus <-->|"SocketCAN"| Linux
    M5Stack ---|"UIOutput"| Display
    M5Stack ---|"BuildConfig"| BuildNote

    click M5Stack "https://github.com/aho1go/m5can/blob/master/M5CAN.ino"
    click SD "https://github.com/aho1go/m5can/tree/master/SD/"
    click Display "https://github.com/aho1go/m5can/blob/master/Free_Fonts.h"

    classDef embedded fill:#AED6F1,stroke:#1B4F72,stroke-width:2px;
    classDef storage fill:#F9E79F,stroke:#B7950B,stroke-width:2px;
    classDef ui fill:#FAD7A0,stroke:#E67E22,stroke-width:2px;
    classDef external fill:#A9DFBF,stroke:#145A32,stroke-width:2px;
    classDef bus fill:#D0ECE7,stroke:#17A589,stroke-width:2px;
    classDef note fill:#D5DBDB,stroke:#566573,stroke-width:2px;
```
