# adeniltonr/arduino-nano-update_bluetooth-hc-05 architecture

> Architecture diagram of the GitHub repository adeniltonr/arduino-nano-update_bluetooth-hc-05, generated by GitDiagram from its file tree, README and a sample of source files (last updated 2025-03-28). It is an AI-made overview: check details against the source.

- Interactive diagram: https://gitdiagram.com/adeniltonr/arduino-nano-update_bluetooth-hc-05
- Repository: https://github.com/adeniltonr/arduino-nano-update_bluetooth-hc-05

## Overview

##### Main Components
- Hardware:
- Arduino Nano (with ATMEGA328P) – the primary microcontroller.
- HC-05 Bluetooth Module – responsible for wireless communication.
- Supporting Circuitry:
- Voltage divider circuit on the HC-05 RX line (to adapt 5V logic to 3.3V levels).
- Transistor circuit (circuit with a PNP transistor) incorporated to allow firmware updates via either USB or Bluetooth.

- Software/Firmware:
- Firmware Update Routine – logic that manages the AT command configuration for the HC-05 and bootloader parameters.
- Example “Pisca_led” Sketch – represents other functional code deployed on the Arduino.
- The communication bridge provided by the SoftwareSerial library in the configuration sketch.

##### Relationships and Interactions
- Directional data flow:
- That the HC-05 communicates directly with the Arduino’s digital pins (specifically mapping TX/RX lines with reference to voltage conversion through the divider).
- That the AT command configuration commands are sent from the Arduino (possibly via an IDE monitor) to the HC-05 for proper operational mode setup.
- Demonstrate how the firmware can be updated either via a USB connection (direct from the IDE) or through the Bluetooth pathway (once paired with a PC/laptop) as depicted in the README.
- How the two code bases (under “codigo_principal” for normal application code and “codigo_teste” for test/AT command provisioning) work together to cover both demonstration and configuration features.

##### Architectural Patterns/Design Principles
- Separation of Concerns: The system distinguishes between normal operational firmware (example: blinking LED) and the firmware used to configure or update via Bluetooth.
- Interface and Communication Layer: Highlight the role of the SoftwareSerial-based communication layer that acts as a bridge between the Arduino’s main serial interface and the HC-05 module.

##### Relevant Technologies and Frameworks
- Arduino (AVR C/C++ environment using Arduino IDE).
- SoftwareSerial library for BT communication.
- Standard AT command set for HC-05 configuration.

## Diagram (Mermaid)

```mermaid
flowchart TD
    %% External Component
    PCLaptop["PC/Laptop (Update Initiator)"]:::external

    %% Hardware Components
    subgraph "Hardware Components"
        ArduinoNano["Arduino Nano (ATMEGA328P)"]:::hardware
        VoltageDivider["Voltage Divider Circuit"]:::hardware
        HC05["HC-05 Bluetooth Module"]:::hardware
        PNPTransistor["PNP Transistor Switch Circuit"]:::hardware
        USBInterface["USB Interface"]:::hardware
        Docs["Docs (Hardware Circuit Diagrams)"]:::hardware
    end

    %% Software/Firmware Components
    subgraph "Software/Firmware Components"
        FirmwareUpdate["Firmware Update Routine (AT Commands & Bootloader)"]:::software
        PiscaLed["Example 'Pisca_led' Sketch"]:::software
        SoftwareSerial["SoftwareSerial Communication Bridge"]:::software
    end

    %% Connections between Hardware Components
    ArduinoNano -->|"TX->RX (via Voltage Divider)"| VoltageDivider
    VoltageDivider -->|"Voltage Adjusted Signal"| HC05
    HC05 -->|"RX<-TX"| ArduinoNano
    ArduinoNano -->|"FirmwareUpdate via USB"| USBInterface
    Docs ---|"Reference Schematics"| ArduinoNano
    Docs ---|"Reference Schematics"| PNPTransistor

    %% Connections between Software and Hardware
    PiscaLed -->|"Deploys to"| ArduinoNano
    FirmwareUpdate -->|"Operates on"| ArduinoNano
    FirmwareUpdate -->|"Sends commands via"| SoftwareSerial
    SoftwareSerial -->|"Bridges to"| HC05

    %% External Communication via Bluetooth
    PCLaptop <==>|"BluetoothPairing_Update"| HC05

    %% Click Events
    click Docs "https://github.com/adeniltonr/arduino-nano-update_bluetooth-hc-05/tree/main/Docs"
    click HC05 "https://github.com/adeniltonr/arduino-nano-update_bluetooth-hc-05/blob/main/codigo_teste/configuracao-hc-05/configuracao-hc-05.ino"
    click FirmwareUpdate "https://github.com/adeniltonr/arduino-nano-update_bluetooth-hc-05/blob/main/codigo_teste/configuracao-hc-05/configuracao-hc-05.ino"
    click PiscaLed "https://github.com/adeniltonr/arduino-nano-update_bluetooth-hc-05/blob/main/codigo_principal/Pisca_led/Pisca_led.ino"

    %% Styling
    classDef hardware fill:#ADD8E6,stroke:#000,stroke-width:2px;
    classDef software fill:#FFDEAD,stroke:#000,stroke-width:2px;
    classDef external fill:#90EE90,stroke:#000,stroke-width:2px;
```
